Study on Connectivity Analysis and Injection–Production Optimization of Strong Heterogeneous Sandstone Reservoir Based on Connectivity Method

The D reservoir in the Bongor Basin, southern Chad, is highly heterogeneous. In the stage of waterflood development, the injected water is seriously channeled along the dominant channel, and the water drive effect becomes worse. At the same time, due to the strong edge and bottom water, the water flooding situation is aggravated, the water cut is increased, and the development efficiency is reduced. To accurately identify the inter-well connectivity relationship, we developed a reservoir inter-well connectivity model based on the principle of inter-well connectivity and dynamic production data and reservoir geological parameters. Thus, the plane water injection split coefficient and water injection efficiency of each reservoir layer were obtained. The results are in good agreement with the calculation results of inter-well connectivity through verification with field tracer interpretation. The practical application results show that the method can increase the annual output of oil by 1.3%, which has a good oil increase effect. In this study, a model of inter-well connectivity in multi-layer sandstone reservoirs was established for the first time. The production performance of the model injection–production well was optimized in real time by a historical fitting and production optimization algorithm and then applied to real reservoirs, so that it could effectively improve the oilfield development and optimize the injection–production structure.