Agricultural Water Management for Rice Production: A Comprehensive Analysis

The identified problem revolves around establishing the water requirements for rice seeding, growth, and maturity in hot climatic conditions. This study reviews the net water requirement for rice growth or production under various climatic conditions in the Cross River Basin. It was observed that the water requirement from seeding to harvest varies from location to location, maintaining a FAO range, as postulated by Brouwer et al., 1986, ultimately falling between 450mm to 700mm for hot weather.The methodology used for investigating the Net Irrigation Water Requirements for rice growth to maturity involves the application of New_Clim Location and CropWater software. These tools were utilized to compute Reference Evapotranspiration (ETo) and Crop Water Requirements (CWR) for the net irrigation water requirements of rice, respectively. The data were obtained from meteorological stations within the Cross River Basin. In rainfed conditions, no water stress is practically observed throughout the entire crop cycle, affirming that no irrigation system is needed in such a specific climate. This study uses data generated through New_LocClim as input into CropWat, which, among other factors, determines the net water requirement for rice growth and production. Consequently, the results obtained from the use of the CropWat model in determining rice water requirements for Obudu, Nkari, Ikom, and Ijegu-Yala were 633.7 mm, 397.9 mm, 303.0 mm, and 548.4 mm, respectively. The water requirement of only two locations, Obudu and Ijegu-Yala, fell within the FAO-suggested range of 450 mm to 700 mm (Brouwer et al., 1986) for hot climates, while Nkari and Ikom LGAs did not comply with Brower et al., 1986 postulation due to their location in a relatively less hot climate.