lanesmith/Chalokwa-Battery-Analysis

Data analysis for the KiloWatts for Humanity energy kiosk in Chalokwa, Zambia # Chalokwa-Battery-Analysis ## Package Purpose The purpose of this package is to analyze battery, load, and temperature data from the KiloWatts for Humanity (KWH) solar kiosk installed in Chalokwa, Zambia. Data analysis is necessary due to a increase in interruptions in service that have been occurring since the middle of June 2019. The purpose of the data analysis is to see if any causes of failure can be determined and if any other pertinant information can be gleaned. Results from this analysis were presented to the KWH Microgrid Team; the main take- away was that the battery system is failing, likely due to a combination high ambient temperature and daily cycling. An increase in load was observed, but it does not appear to be the cause of the increase in interruptions in service. Rather, the increased loading appears to simply have hastened the process of notifying that the battery system was failing. The tools and data contained within this package will allow for similar data analysis. All data was acquired from KWH's website. ## Associated Publication Lane D. Smith, Henry Louie, Steve Szablya, & Dave Goldsmith. "Remote Assessment of Battery Degradation-Related Service Interruptions in an Energy Kiosk". *2020 IEEE Global Humanitarian Technology Conference (GHTC)*, 2020. ## Package Contents `/tools`: Contains the following modules: - `data_grab.py`: Reads .csv data downloaded from KWH's website and saves them as pickled DataFrames. - `data_view.py`: Reads the pickled DataFrames and generates various plots, including the listed data sets. `/data`: Contains pickled DataFrames of the following data: - Battery voltage - Battery current - Power into the inverter - Solar photovoltaic (PV) generation - Ambient temperature - Freezer temperature ## Software Requirements To use the included tools, the following software is required: - Python 3 (it is recommended to use a scientific distribution of Python, such as Anaconda) The following Python libraries are also req …